skip to main content

Valve cores

The valve core is literally the core element of a standard valve. It screws into the valve body and is exchangeable. When the valve core is screwed into the valve body, the outer seal creates a seal against the valve body. A spring-loaded plunger washer ensures reliable sealing of the valve core and allows safe opening and closing. This allows the medium to flow through the valve.

Valve cores are available in numerous diameters and lengths. There are also different types of valve cores for different pressure ranges, depending on the particular application. Different seal materials allow use with diverse media. Our valve cores are designed to withstand both static and dynamic pressure, depending on the type.

Valve cores for special requirements, such as high- and low-pressure use, are available on request. We will also be glad to create CAD models for you on request.

Contact us now for further information

 

Areas of application

AIGO-TEC valve cores are used in diverse applications. They are used for example in valves for filling tyres (tyre valves for bicycles, motorbikes and cars, as well as construction machinery), in pressure accumulators, surge tanks, pneumatic systems and special wheels.

Materials
Brass, nickel-plated brass.

Our range of valve cores

Ventileinsatz

Valve cores 

Item number: 315107

Length: 20 mm, two-part

Material: Brass

Working pressure: Up to 15 bar

Opening pressure: -

Bursting pressure: -

Temperature: -40 to+150Β° C

Anzugsmoment: 0,25 - 0,56 Nm

Anwendung: Kompatibel mit Luft und Nitrogen

Ventileinsatz

Valve cores 

Item number: 315196

Length: 20 mm, two-part

Material: Nickel-plated

Working pressure: Up to 15 bar, briefly 20 bar

Opening pressure: At least 5 bar

Bursting pressure: -

Temperature: -30 to +120Β° C

Tightening torque: 0,25 - 0,56 Nm

Application: Resistant to fuel, mineral oil, refrigerants (R134a, R410A).

Ventileinsatz

Valve cores 

Item number: 319300

Length: 20 mm, two-part

Material: Brass, partly nickel-plated,

Working pressure: Static: 12 - 250 bar, dynamic: 12 - 150 bar

Opening pressure: Ca. 3 bar

Bursting pressure: -

Temperature: -40 to +100Β° C, briefly up to 120Β°C

Tightening torque: 0,25 - 0,3 Nm

Application: Apparatus and pressure accumulators, resistant to fuel, mineral oil and oil-based fluids (R12, R134a, R404A, R407C, R410A, R507).

Ventileinsatz

Valve core

Item number: 394840

Length: Ca. 14,5 mm, one-piece

Material: Brass

Working pressure: 550 bar

Opening pressure: -

Burst pressure: Greater than/equal to 2,200 bar

Temperature: -

Tightening torque: 0,3 - 0,5 Nm

Application: -

Note

Aluminium valves require the use of nickel-plated valve cores, to prevent contact corrosion between the bare brass of the valve core and the aluminium valve.

 Please note: For a reliable seal, a valve cap with an inserted sealing ring must be screwed firmly onto the valve core. This is recommended by the ETRTO (European Tyre and Rim Technical Organisation).

Are you interested in our valve cores?
We will be glad to assist you!

Inquire now